Mon-fri: 8:30am-2:30pm
Ceiling Panel 400 2×2
Home » Tin Ceiling Showroom  » Ceiling Panel 400 2×2

Product Information

Tin ceiling pattern 400

Ceiling panels may be used on ceilings or walls. To see how ceilings are matched with cornices and moldings, visit {Designs} for traditional combinations. This product is AVAILABLE AS A DROP-IN ONLY.

Metals

Our standard metal for ceilings is tinplate. Tinplate is steel that is coated on both sides with tin in order to offer some protection from rust. Please inquire about special ordering stamped ceilings in copper, brass, zinc and galvanized metal. Copper and brass may be ordered as either raw or cleaned, polished and clear-coated. Galvanized metal is a sheet of steel coated on both sides with zinc. We stamp galvanized as either “Dull” or “Shiny” with the “Dull” being easier to paint.

Dimensions

DROP-IN (2x2): 23-5/8 in. x 23-5/8 in.

Use & Finishing

Refer to our {How To} page to learn more about designing, finishing and installing your tin ceiling. Plus, you will find helpful tips for restoration, repair, cleaning, maintenance and fire protection.