Mon-fri: 8:30am-2:30pm
Molding 208
Home » Tin Ceiling Showroom  » Molding 208

Product Information

Molding Tile 208

Moldings are often used between the field and the filler. This molding can be ordered with corresponding components. For ceiling designs with elbow corners, order ELL: No. 2081. For other corner types, simply cut with tin snips to the desired angle.

Metals

Our standard metal for molding is tinplate. Tinplate is steel that is coated on both sides with tin in order to offer some protection from rust. Please inquire about special ordering stamped ceilings in copper, brass, zinc and galvanized metal. Copper and brass may be ordered as either raw or cleaned, polished and clear-coated. Galvanized metal is a sheet of steel coated on both sides with zinc. We stamp galvanized as either “Dull” or “Shiny” with the “Dull” being easier to paint.

Dimensions

HEIGHT: 3 in. | LENGTH: 48 in.

Use & Finishing

Refer to our { How To } page to learn more about designing, finishing and installing your tin ceiling. Plus, you will find helpful tips for restoration, repair, cleaning, maintenance and fire protection.