Mon-fri: 8:30am-2:30pm
Molding 149
Home » Tin Ceiling Showroom  » Molding 149

Product Information

Molding Tile 149

Moldings are often used between the field and the filler. This molding is not sold with corner pieces but can simply be cut with tin snips to the desired angle.

Metals

Our standard metal for molding is tinplate. Tinplate is steel that is coated on both sides with tin in order to offer some protection from rust. Please inquire about special ordering stamped ceilings in copper, brass, zinc and galvanized metal. Copper and brass may be ordered as either raw or cleaned, polished and clear-coated. Galvanized metal is a sheet of steel coated on both sides with zinc. We stamp galvanized as either “Dull” or “Shiny” with the “Dull” being easier to paint.

Dimensions

NOSING: 1-1/4 in. | LENGTH: 48 in.

Use & Finishing

Refer to our { How To } page to learn more about designing, finishing and installing your tin ceiling. Plus, you will find helpful tips for restoration, repair, cleaning, maintenance and fire protection.